Bead Blaster – Model FT 6035
$2,112.00
Bead Blaster Cabinet Highlights
A bead blaster is a useful tool for removing surface rust and other debris from almost any material. Called a bead blaster because they are capable of using glass bead abrasive media. These units are not limited to glass beads, you can use a variety of media in them. These powerful blast machines can prepare surfaces for painting, bring new life to old items, and much more. Further down is a full list of information and more details.
- Made in USA: Proudly engineered and assembled in Dowagiac, Michigan. Many bead blast cabinets are imported and lack the quality of our machines. We form the steel, weld, paint, and perform quality checks all under our own roof.
- Fully Assembled: Our cabinets do not require any assembly. Other cabinets arrive in a flat box that you have to assemble with dozens of bolts. Not only does that eat away your valuable time, but it will likely cause media leaks from the bolt holes. Heavy parts can also make those cabinets less stable. A Cyclone cabinet comes ready to blast. Unbox, attach the air supply, add media and get to work! And, it is welded top to bottom so it’s extremely steady and sturdy.
- Flexible Abrasive Media Options: As stated above, you are not limited to glass beads with a bead blaster. It’s just a name. Any of our blast systems are capable of garnet, silicon carbide, aluminum oxide, and more. We never have and never will recommend sand because of the serious risk of silicosis.
- Many Uses: The FT-6035 blast cabinet is a flexible option for sandblasting. It’s large chamber offers room for small pieces and large pieces as well. The large top opening system makes it easier on the user to lift parts into the cabinet. And for smaller pieces or quick adjustments, the large side door (right side) makes your work easier.
Summary
An ideally sized blast cabinet for a variety of applications. The unit offers a powerful blast system controlled by a foot pedal. One of our best blast cabinets. Please see the “Description” and “Additional Information” tabs below for a full tour of the FT-6035.
Video Tour
Click below thumbnail to view FT-6035 video tour.
California Proposition 65 Compliance
WARNING: This cabinet is constructed from steel. In accordance with proposition 65 we are complying by indicating that steel has been known to contain Nickel. Nickel is a chemical known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov
Description
Bead Blaster Cabinet
A bead blaster built like no other. An affordable, and fully assembled, blast cabinet made in the USA. If you are looking for the best bead blaster cabinet for sale available today – here it is. The FT-6035 has a large interior for almost any size parts. It has fully welded 16 gauge steel cabinet construction and sealed to prevent leaking. The legs are angle iron and welded to the cabinet blast chamber. This means sturdy construction.
It includes a 90 CFM sandblast dust collector which improves visibility inside the cabinet. Therefore, your visibility on your work is better. The bead blast cabinet has unit is sturdy and has an easy open lid. It includes two heavy duty gas-assisted shocks. Opening and closing the door is simple and easy. Also, a safety valve comes installed that shuts off air when the lid is open. The FT 6035 comes complete with a foot pedal operated sandblast gun and tungsten carbide nozzle.
Sandblast Gun
The tungsten carbide blast nozzle is superior to ceramic and steel. All else equal, the nozzle will last longer. The system requires 25 CFM @ 70-90 PSI and is pedal operated. This makes it easier on the user when operating for any period of time.
Full Top Opening with Side Door
A full top opening system is one of our most unique features. You can load larger parts with ease because the top flips from front to back. Also included is a right hand side door. Constructed from cabinet steel and reinforced, the door solidly closes and won’t leak.
Also included with the FT 6035 sandblast cabinet are comfortable rubber blast gloves that protect your hands. They also are long enough to easily reach around inside the sandblast cabinet without opening the lid.
Sandblasting Dust Collector Included
The FT 6035 bead blaster cabinet includes our powerful DC-1500 sandblast dust collector. The DC-1500 produces a powerful 90 CFM and works perfectly to keep visibility clear inside the blast cabinet. The cabinet comes with two light receptacles and on/off switch. The switch controls an additional electrical receptacle for the included sandblast dust collector. Therefore, you control the entire cabinet with one easy on/off switch location on the cabinet. Finally, the lid interacts with an air cut off safety valve. If the lid is open, the valve cuts the air to the sandblast gun, thus reducing the risk of user injury.
Sand blasting Uses
This large sand blasting cabinet has many uses. You can easily remove rust, carve/engrave glass, and prepare surfaces for almost anything. The bead blaster cabinet allows you to quickly load parts, and remove stubborn debris from the surface of your project. Rust, old paint, many other uses too.
If you are unsure of what you need contact us. We do not have a complicated phone system. As a result, our customer service can quickly help you narrow down the right size sand blasting cabinets, abrasive media, dust collector and sandblaster parts.
Flexible Abrasive Media Choices
This abrasive media blast cabinet can handle abrasives like white or brown aluminum oxide, glass beads, silicon carbide, or blasting garnet. We supply a full catalog of abrasive media. We do not recommend steel shot and under no circumstances should you ever use sand in a bead blaster cabinet. Read more here to learn about the dangers of using sand in an abrasive blasting cabinet. Sandblasting Safety
Bead Blasting Cabinet
Known by different names, but basically performs the same functions. A simple box with air attached to a sandblast gun. The gun pulls media from the bottom of the cabinet and forces it at high speed toward a part. As a result it can be confusing when you search for bead blaster or media blasting cabinet and see so many choices. The abrasive media used is basically how they have so many names. Do not worry.
Cyclone has been in business for over 40 years. Because of our experience we can quickly help you by listening to your needs and matching them with a sandblasting “machine” that fits your project.
An affordable large bead blasting cabinet from Cyclone. Model FT-6035 is one of our most popular blasting cabinets. Because it has a large interior, powerful blasting gun, and includes a dust collector this unit will not disappoint. The full top opening lid is easy to open because of the lift assist system. The side door is all steel and makes part access or adjustment easy.
Choose Cyclone – Made in USA
Cyclone has been in business for over 40 years. Because of our experience we can quickly help you by listening to your needs and matching them with a sandblasting “machine” that fits your project.
CA Prop 65
WARNING: This cabinet is constructed from steel. In accordance with proposition 65 we are complying by indicating that steel has been known to contain Nickel. Nickel is a chemical known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov
Additional information
| Weight | 350 lbs |
|---|---|
| Cabinet-Lighting | |
| Construction | |
| Electrical Requirements | |
| Gloves | |
| Has Side Door | |
| Item Weight | |
| Lid Assist | |
| Lid Safety Valve | |
| Lid Style | |
| Nozzle Type | |
| Overall Dimensions | |
| Sandblast Dust Collector | |
| Sandblast System Air Requirements | |
| Sandblast System Quantity | |
| Sandblaster Operation | |
| View Window | |
| View Window Protection | |
| Working Dimensions |
