Browse our complete line of sandblasting equipment and accessories
Showing 2 products in Pressure Sandblaster
| Image | Product Name | Part No. | Description | Action |
|---|---|---|---|---|
|
Direct Pressure Blast Pot Sandblaster – PT-100
Sandblasting Cabinets, Portable Sandblaster, Pressure Sandblaster |
2565
|
Direct Pressure Blast Pot Sandblaster – PT-100. Efficient pressure blasting sy... | |
|
PT 100 SK Pressure Sandblaster
Sandblasting Cabinets, Portable Sandblaster, Pressure Sandblaster |
2568
|
PT 100 SK Pressure Sandblaster – "Side Kick". Powerful pressure blast pot with... |
Part No.: 7005
Categories:
Parts and Accessories
Sandblaster Guns
DescriptionSandblast Nozzle Holder – 5-14-CFMA sandblast nozzle holder 5-14-CFM is the structure used to sandblast with when you have a foot operated blast system. The nozzle holder has a screw to hold the nozzle in place. The orifice that creates the suction is contained in the nozzle. THIS ITEM IS JUST THE HOLDER, SET SCREW, and BARB. It **Does Not** include a sandblast nozzle or orifice. These are available separately here depending on your air requirements.This item can be used with our 5 and 14 CFM nozzles and orifices. It can accept our mild steel, ceramic, or tungsten carbide nozzles.
Part No.: 2022
Categories:
Parts and Accessories
Sandblast Gloves
DescriptionDirect replacement for sandblasting cabinet sandblast gloves. 18″ – please confirm cabinet model when ordering to ensure proper fit. Image shown may not reflect actual product.
Part No.: 7000
Categories:
Air Accessories
Parts and Accessories
Sandblaster Guns
DescriptionA complete replacement for 25 CFM complete gun systems. 25 CFM nozzle holder, orifice, tungsten carbide nozzle.
Part No.: 7010
Categories:
Parts and Accessories
Sandblaster Guns
Description25 CFM Delron Nozzle Holder Only (ft operated systems only)
Part No.: 7008
Categories:
Nozzles & Orifices
Parts and Accessories
Description25 CFM Tungsten Carbide Nozzle
Part No.: 4056
Categories:
Parts and Accessories
Window and Door Parts
DescriptionOver time and with normal wear and tear, gasket wears out. If you see gaps or notice leaking from gasket it may be time to replace worn gaskets/seals. 3/4″ W X 3/4″ THICK. Photo shows roll, but you receive 77″ roll. Replaces door gasket on most cabinets. Contact us if you have questions or concerns.
Part No.: 2548
Categories:
Sandblasting Cabinets
Siphon Fed Sandblasting Cabinet
MODEL 4826
Cabinet Details
Specification Details
Overall Dimensions 65" (h) x 52" (w) x 36" (d)
Working Dimensions 26" (h) x 48" (w) x 26" (d)
Window 25" (w) x 10" (h) Acrylic
Construction Welded 16 Gauge Steel
Blast System 14 CFM @ 70-90 PSI
Blaster Operation Foot Pedal Operated
Gloves 24" Long Unlined
Electrical 110 Volts
Side Door 18" (w) x 12" (h)
Weight 275 US Pounds
The 4826 offers plenty of room for small to large size parts. It includes a powerful 90 CFM dust collector to improve visibility inside the cabinet.
Cyclone abrasive blasting cabinets are constructed from high quality components, then sealed and painted to prevent leaks and protect the finish. The interior of the view window includes a protective layer to prolong its life.
Welded steel makes for a sturdy cabinet capable of handling heavy items. A foot pedal activated blast gun with a ceramic nozzle produces a powerful 14 CFM. This makes quick work of almost any project.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: 2001
DescriptionAn Acrylic Sandblast Window 10″x25″. This is a specially designed window that is safer than using traditional glass. Traditional glass, if broken, is sharp and dangerous. This is a direct replacement window for our cabinets. Please look below for Found on Model for specifics. When ordering, it is helpful to specify your cabinet type. Replacing the glass in your Cyclone Abrasive Sandblasting Cabinet is very easy to do and can be done with hand tools.Additional informationFound on Model3624, 3824, 4040, 4224, 4826, FT 3522
Part No.: 2013
Categories:
Air Accessories
Parts and Accessories
Sandblast Hose
DescriptionOften air hose wears out over time and with normal use. This assembly is a direct replacement. PLEASE SPECIFY the model cabinet you are replacing and we will ensure a perfect fit.
Part No.: 2555
Categories:
Sandblasting Cabinets
Siphon Fed Sandblasting Cabinet
MODEL FT 6035
Cabinet Details
Specification Details
Overall Dimensions 65" (h) x 65" (w) x 46" (d)
Working Dimensions 30" (h) x 60" (w) x 35" (d)
Window 25" (w) x 10" (h) Acrylic
Construction Welded 16 Gauge Steel
Blast System 25 CFM @ 70-90 PSI
Blaster Operation Foot Pedal Operated
Gloves 24" Long Unlined
Electrical 110 Volts
Side Door See Schematic Above
Weight 350 US Pounds
The FT 6035 is one of our most popular units. It offers a huge cabinet interior. It includes a powerful 90 CFM dust collector to improve visibility inside the cabinet.
Cyclone abrasive blasting cabinets are constructed from high quality components, then sealed and painted to prevent leaks and protect the finish. The interior of the view window includes a protective layer to prolong its life.
Welded steel makes for a sturdy cabinet capable of handling heavy items. A foot pedal activated blast gun with a ceramic nozzle produces a powerful 14 CFM. This makes quick work of almost any project.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: 2323
Categories:
Abrasive Sandblasting Cabinet Dust Collector
Abrasive Sandblasting Cabinet Dust Extractor
Dust Collectors
DescriptionDC-1500 Blast Cabinet Dust CollectorStarting 2/1/2022, there is a temporary $55 materials surcharge on the DC-1500. Due to increasing plastics cost we needed to apply this for the time being. The price below reflects the added surcharge.This blast cabinet dust collector has a powerful 90 CFM (cubic feet per minute) of airflow. The construction is polyethylene making it extremely durable. The DC-1500 also comes with a six foot hose to connect directly to the cabinet. Therefore, physical placement of the unit is more convenient. Additionally, this adds flexibility to the overall footprint of your work environment. The unit comes with a cloth bag filter and motor pre-filter to protect the motor. We believe so strongly in this unit that we include it on almost every one of our abrasive sandblasting cabinets.Watch our easy setup video on YouTube:Sandblasting Dust Collector SystemsThe DC-1500 improves the visibility inside an abrasive blast cabinet. Impaired vision during abrasive blasting can lead to accidental damage to part surfaces. Add a DC-1500 to your system and improve your ability to view the workspace! Need more CFM? Check out the DC-4000 which provides nearly 400 CFM!Abrasive Sand Blast Dust ExtractorA sand blasting cabinet dust extractor and a blast cabinet dust collector are interchangeable terms. The basic concept is a device that attaches via a hose to a cabinet. Once switched on, the unit begins drawing air, media, and debris from inside the cabinet. The filter in the unit then captures the debris and particles within the body. The user will need to regularly clean the filter to prolong the life of the unit.Blast Cabinet Dust CollectorThis system will not disappoint. It includes a filter bag and cartridge filter. Combined, these help prolong the life of the motor. As a result, your investment will last you a long time. Because the system is easy to setup, use, and maintain, you spend more time. And, the DC-1500 blast cabinet dust collector can be connected to nearly any blast cabinet via the flexible hose.Additional informationWeight25 lbsDimensions18 × 53 inBlast Gun CFM90Hose Length6' Dust Collector Hose – 2 1/4" Hose EndsFilter TypeFilter Bag and Pre Filter IncludedConstructionPolyethylene PlasticElectrical Requirements110 US VoltsItem Weight25 US PoundsDiameter16 1/2"
Part No.: 2547
Categories:
Sandblasting Cabinets
Siphon Fed Sandblasting Cabinet
MODEL 4224
Cabinet Details
Specification Details
Overall Dimensions 65" (h) x 46" (w) x 35" (d)
Working Dimensions 23" (h) x 42" (w) x 24" (d)
Window 25" (w) x 10" (h) Acrylic
Construction Welded 16 Gauge Steel
Blast System 14 CFM @ 70-90 PSI
Blaster Operation Trigger Operated
Gloves 24" Long Unlined
Electrical 110 Volts
Side Door 18" (w) x 12" (h)
Weight 245 US Pounds
The 4224 offers plenty of room for small to large parts. It includes a powerful 90 CFM dust collector to improve visibility inside the cabinet.
Cyclone abrasive blasting cabinets are constructed from high quality components, then sealed and painted to prevent leaks and protect the finish. The interior of the view window includes a protective layer to prolong its life.
Welded steel makes for a sturdy cabinet capable of handling heavy items. A trigger activated blast gun with a ceramic nozzle produces a powerful 14 CFM. This makes quick work of almost any project.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: 7003
Categories:
Parts and Accessories
Sandblaster Guns
DescriptionTrigger gun, pickup hose. Complete kit for basic sandblasting.
Part No.: 2558
Categories:
Abrasive Sandblasting Cabinet Dust Collector
Abrasive Sandblasting Cabinet Dust Extractor
Dust Collectors
DescriptionDC-4000 Sandblaster Dust CollectorNeed big airflow? Want improved visibility? Look no further. This sandblaster dust collector maintains 400 CFM (cubic feet per minute) of airflow. Visibility is easily improved! Welded steel makes it extremely stable. The DC-4000 comes with a six foot hose to connect directly to the cabinet. Therefore, physical placement of the unit is more convenient. Additionally, this adds flexibility to the overall footprint of your work environment. Finally, configure the DC-4000 with an 5″ hose or 2.25″ hose depending on your cabinet. We can help with that decision.Sand Blasting Dust Collector SystemsA Cyclone sandblaster dust collector improves the visibility inside an abrasive blast cabinet. Impaired vision during abrasive blasting leads to damage on part surfaces. Add a DC-4000 to your system and improve your ability to view the workspace! The powerful motor turns a huge impeller, creating an enormous amount of airflow. As a result, the system efficiently removes dust, debris, and worn media inside the cabinet during blasting. That means you can see what you are doing.Abrasive Sand Blast Dust ExtractorA sand blast dust extractor and a sandblaster dust collector are the same thing. The basic concept is a device that attaches via a hose to a cabinet. Once switched on, the unit begins drawing air, media, and debris from inside the cabinet. The filter in the unit captures the debris and particles within the cabinet. Like any tool, regular maintenance is advised. However, it is simple and consists of ensuring the large cartridge filter is cleaned as needed.In accordance with proposition 65 we are complying by indicating that steel has been known to contain Nickel. Nickel is a chemical known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.govAdditional informationWeight250 lbsDimensions18 × 53 inBlast Gun CFM400Hose Length6' Dust Collector Hose – 2 1/4" Hose EndsFilter TypeCloth Wrap, Paper Cartridge FilterConstruction16 Gauge Welded SteelElectrical Requirements110 US VoltsItem Weight225 US PoundsOverall Dimensions72" (h) x 19" (w) x 19" (d)
Part No.: 2565
Categories:
Sandblasting Cabinets
Portable Sandblaster
Pressure Sandblaster
MODEL PT100
Pressure Blaster Details
Specification Details
Tank Diameter 12"
Tank Height 23"
Overall Height 29"
Construction ACSME Certified Pot
Blast System 23 CFM @ 100 PSI
Blaster Operation Manual Valve Control
Hose 10' Pressure Blast
Wheels Solid 6" Rubber
Abrasive Media Capacity 90 US Pounds
Features Air Gauge, Pressure Relief Valve, Safety Goggles
Weight 70 US Pounds
The PT100 is our extremely efficient pressure blasting system. A 10' hose and easy to use manual control valve makes blasting easy. The unit has solid 6" rubber wheels making it portable as well.
The ACSME certified pressure vessel can hold up to 90 US pounds of abrasive media, keeping you blasting longer! We also include a pressure relief valve, safety goggles, and an air gauge.
The unit is easy to fill, move, and use. If you are searching for a pressure pot blasting system, this is an ideal unit for almost every application.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: DC15105
Categories:
Dust Collectors
Parts and Accessories
DescriptionThis dust collector bag filter is a direct replacement for our Cyclone dust collector model DC-1500. This dust collector bag is easy to replace. See your YouTube video to see how easily the DC1500 is assembled here: https://www.youtube.com/watch?v=tkLOUBzsyxMRegular maintenance of your Cyclone dust collector is important and simple. Above all else, safety is most important. So, before starting, make sure you wear all appropriate safety gear such as goggles, respirator, and all other recommended safety equipment. Your safety is your first priority and your responsibility.After reviewing all safety information, separate the unit in half. Once separated, remove the dust collector bag and inspect both the bag and canister filter. Finally, reassemble the unit and return it to service. Many customers inquire about when to replace the filter bag and canister filter. There is no definitive answer. However, if after cleaning the filters still appear dirty or worn you should replace them. Additionally, if you find that your cyclone dust collector’s performance is getting worse, this is also a sign to replace the filters.Over time, most abrasive blasters and dust collector parts wear out. This dust collector bag filter works with our DC-1500 dust collector. The cyclone dust collector comes installed with a bag filter and a canister filter. The purpose of the filtration is to prolong the life of the dust collector motor.The DC1500 cyclone dust collector includes two filter types. The first is the DC15105 weighted cloth filter bag. Its purpose is to capture large particles and debris. Any particulate passing through the weighted filter bag is then captured by the filter canister.Additional informationFound on ModelDC 1500
Part No.: 2055
Categories:
Dust Collectors
Filter
Parts and Accessories
DescriptionThis dust collector filter canister is a direct replacement for our Cyclone dust collector model DC-1500. This dust collector filter is easy to replace. See your YouTube video to see how easily the DC1500 is assembled here: https://www.youtube.com/watch?v=tkLOUBzsyxMRegular maintenance of your Cyclone dust collector is important and simple. Above all else, safety is most important. So, before starting, make sure you wear all appropriate safety gear such as goggles, respirator, and all other recommended safety equipment. Your safety is your first priority and your responsibility.After reviewing all safety information, separate the unit in half. Once separated, safely shake the filter bag and inspect both the bag and canister filter. Finally, reassemble the unit and return it to service. Many customers inquire about when to replace the filter cartridge and bag filter. There is no definitive answer. However, if after cleaning the filters still appear dirty or worn you should replace them. Additionally, if you find that your cyclone dust collector’s performance is getting worse, this is also a sign to replace the filters.Over time, most abrasive blasters and dust collector parts wear out. This dust collector filter cartridge works with our DC-1500 dust collector. The cyclone dust collector comes installed with a bag filter and a canister filter. The purpose of the filtration is to prolong the life of the dust collector motor.The DC1500 cyclone dust collector includes two filter types. The first is the DC15105 weighted cloth filter bag. Its purpose is to capture large particles and debris. Any particulate passing through the weighted filter bag is then captured by the filter canister.Additional informationWeight2 lbsFound on ModelDC 1500
Part No.: DC15106
Categories:
Dust Collectors
Parts and Accessories
DescriptionThis is a replacement hose: Dust Collector Hose Six Feet Length for the Cyclone DC-1500 Dust collector. This flexible but sturdy hose permits maximum airflow between the dust collector and the blasting cabinet. An important factor when maintaining maximum visibility inside the cabinet is a priority.Note that the hose is pictured below attached to the DC-1500. This part is ONLY the six foot dust collector hose. Note the red circle in image identifying the hose.Additional informationFound on ModelDC 1500
Part No.: DC15400
Categories:
Dust Collectors
Parts and Accessories
DescriptionThis is a replacement motor: Dust Collector Motor – 90 CFM for the Cyclone DC-1500 Dust collector. Due to variations in vendor supply, pictured motor vs. what you receive may vary. However, you will receive the proper replacement part for the DC-1500 dust collector.Additional informationFound on ModelDC 1500
Part No.: 2031G
Categories:
Parts and Accessories
Sandblaster Guns
DescriptionComplete foot pedal assembly with sandblast gun. Foot pedal, hose, nozzle holder, orifice, ceramic nozzle.
Part No.: 2010
Categories:
Parts and Accessories
Sandblast Gloves
DescriptionUsed to connect gloves to the cabinet these clamps are easy to replace and install. Please let us know what cabinet you have so we can ensure the appropriate size clamp.
Part No.: DC4100
Categories:
Dust Collectors
Filter
Parts and Accessories
DescriptionThe purpose of the large dust collector filter cartridge is to prevent / reduce the amount of dust and debris that passes to the motor. As a result of reducing this particulate it prolongs the life of the motor.The large filter cartridge is easy to install. First, you open the side door on the DC-4000 and pull the old cartridge out. Next, to install the large cartridge filter into the cyclone dust collector you just push the new filter in place. That’s all there is to it!Certainly, routine maintenance of the filter cartridge is essential as well. Determining when to clean your system depends on your usage. The more you use the system, the more regularly you should clean the system.Eventually, all filters should be replaced, even with proper maintenance.
Part No.: 2551
Categories:
Sandblasting Cabinets
Siphon Fed Sandblasting Cabinet
MODEL A4800
Cabinet Details
Specification Details
Overall Dimensions 70" (h) x 53" (w) x 36.5" (d)
Working Dimensions 36" (h) x 48" (w) x 36" (d)
Window 25" (w) x 10" (h) Acrylic
Construction Welded 16 Gauge Steel
Blast System 25 CFM @ 80-90 PSI
Blaster Operation Foot Pedal Operated
Gloves 24" Long Unlined
Electrical 110 Volts
Dual Side Doors See Schematic Above
Weight 350 US Pounds
The A4800 offers has two large side doors and huge capacity inside. It includes a powerful 90 CFM dust collector to improve visibility inside the cabinet.
Cyclone abrasive blasting cabinets are constructed from high quality components, then sealed and painted to prevent leaks and protect the finish. The interior of the view window includes a protective layer to prolong its life.
Welded steel makes for a sturdy cabinet capable of handling heavy items. A foot pedal activated blast gun with a ceramic nozzle produces a powerful 14 CFM. This makes quick work of almost any project.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: 2004
Categories:
Parts and Accessories
Window and Door Parts
DescriptionOver time lid gasket wears out with normal use. Replace gasket when you notice any gaps in the gasket or dust leaving the cabinet. Easy to replace. When ordering or calling, please let us know what cabinet you are using these on. Lengths do vary on different cabinet models.
Part No.: 7100
Categories:
Nozzles & Orifices
Parts and Accessories
Sandblaster Guns
DescriptionO-Ring & Washer Set For Gun Assembly
Part No.: 2011
Categories:
Parts and Accessories
Sandblast Gloves
DescriptionUsed in conjunction with glove clamps to comfortably connect gloves onto cabinet chassis. Price shown for one insert.
Part No.: 2048
Categories:
Parts and Accessories
Window and Door Parts
DescriptionQuantity twelve mylar shields for windows part number: 2049 or 6021 WindowMeasures 46.25″ x 13.25″These blast shields protect your window during blasting. They help reduce the likelihood that the abrasive media will “frost” your window, which makes it more difficult to see inside while you are using your blast cabinet.Additional informationWeight3 lbs
Part No.: 2015
Categories:
Parts and Accessories
Sandblast Hose
DescriptionOver time and with normal use, pickup tubes and assemblies wear. These units are easy to replace and are direct replacements for specific cabinets. Please specify your cabinet model when ordering.
Part No.: 2568
Categories:
Sandblasting Cabinets
Portable Sandblaster
Pressure Sandblaster
MODEL PT100 SK
Pressure Blaster Details
Specification Details
Tank Diameter 12"
Tank Height 23"
Overall Height 29"
Construction ACSME Certified Pot
Blast System 23 CFM @ 100 PSI
Blaster Operation Foot Pedal Control
Hose 10' Pressure Blast
Wheels Solid 6" Rubber
Abrasive Media Capacity 90 US Pounds
Features Components to connect system to existing cabinet
Weight 70 US Pounds
The PT100 SK is what we call our "Side Kick". This powerful pressure blast pot includes the necessary components to connect to an existing blasting cabinet.
We bring pressure blasting power to your existing cabinet. This saves on the expense of a new direct pressure system. Pressure blasting can be more efficient than siphon systems and can also be more expensive.
We make connecting this unit easy and include the parts you need to get to work fast.
Our headquarters is in Michigan and we proudly label our products Made in the USA. Our customer service is ready to help you before or after a purchase.
Part No.: ET150
DescriptionThe ET-150 turntable is an affordable way to make part movements easy inside any cabinet.
Part No.: 212TC
DescriptionSandblaster NozzleTungsten Carbide nozzles are 1 7/8 inch long, tungsten carbide, cone shaped.5/16 inch ID, Tungsten Carbide Nozzle for Part Number 222
Part No.: 7077
DescriptionThis part is a 14 CFM sandblast gun orifice. It is 1/8″ ID (Inside Diameter). It is found on many of our cabinets. In the table below you will find the “Found on Model” field to help locate your model. This is a component works in sandblast gun parts.Additional informationOrifice CFM14Orifice Diameter1/8"Orifice TypeHardened SteelFound on Model3624, 4224, FT 3522, FT 3624, FT 4826, TF 1000, TF 5000
Part No.: 7006TC
Categories:
Parts and Accessories
Sandblaster Guns
DescriptionSandblast Gun Sandblaster Nozzle Holder (Complete)This is our 14 CFM sandblast nozzle holder, complete assembly. It includes the following items:1 – Nozzle holder (Black cylinder)1 – 14 CFM Tungsten Carbide Sandblast Nozzle1 – 14 CFM Hardened Steel Orifice1 – Set Screw1 – O-ring1 – Hose barbThe assembly is easy to replace and in many cases you will not need the hose barb. Many of our new cabinets include an air hose with a brass 1/4″ NTP thread that do not require the hose barb.The images shown are the holder without a nozzle installed, the image with the hand shows a ceramic nozzle installed but THIS item comes with a tungsten carbide nozzle. The tungsten carbide nozzle is grayish/black. There is also a photo of the tungsten carbide nozzle outside the holder.Additional informationWeight1 lbs
Part No.: 7080
DescriptionThis part is a Sandblast Nozzle Tungsten Carbide 14 CFM. It can be used either the Cyclone trigger gun assembly Part Number 7001 or the Cyclone Sandblast gun Assembly, part number 7005.This part is a 14 CFM (@70-90PSI) tungsten carbide sandblast gun nozzle. Tungsten carbide is the toughest nozzle we offer. It outlasts hardened steel and even ceramic. The 1/4″ ID nozzle opening produces a good cone shape blast pattern and is great for many applications.Installing this nozzle requires simple hex tools found in most toolboxes and is done in less than 5 minutes.Additional informationNozzle CFM14Nozzle Diameter1/4"Nozzle TypeTungsten Carbide
Part No.: 2057
Categories:
Parts and Accessories
Window and Door Parts
DescriptionSandblaster window protectors are important for prolonging the life of your sandblasting cabinet window. Cyclone abrasive sandblasting cabinets come installed with a mylar window protector in place. These window protectors help reduce the damage to the window itself as abrasive moves within the cabinet.Over time the protector will “frost” due to the abrasive. Therefore, it is regular maintenance to replace the protectors. This saves the cost of replacing the entire window.This part comes in a package of 12 sheets. A great deal and excellent way to protect and prolong the life of your abrasive sandblast cabinet window.Additional informationFound on ModelPlease specify your model – or call and we can assist!
Part No.: 101
Categories:
Ball Valve
Parts and Accessories
DescriptionThis part is a sandblasting ball valve. This ball valve is a direct replacement for our pressure abrasive sandblasting equipment.
Part No.: 106
Description3/8″ ID (Inside Diameter) abrasive sandblasting hose. To reduce waste this hose is sold as follows: Minimum of 10′ (US Feet) section, and 5′ section increments thereafter.Additional informationDimensions1 in
Part No.: 160
Categories:
Parts and Accessories
Sandblast Hose
DescriptionThis hose barb is a direct replacement used on our abrasive sandblasting equipment. The barb has a 1/2″ NPT male thread and a 1/8″ hose barb. Hardened steel. Color may vary from photo.
Part No.: 105
Description1/2″ ID (Inside Diameter) abrasive sandblasting hose. To reduce waste this hose is sold as follows: Minimum of 10′ (US Feet) section, and 5′ section increments thereafter.Additional informationDimensions1 in
Part No.: 2571
Categories:
Siphon Fed Sandblasting Cabinet
Tumble Blaster
DescriptionTumble Blast Cabinet HighlightsSimple.Fully Assembled.Made in USA.Affordable.Small Tumble Blaster FeaturesThe T14 tumble blast cabinet is a powerful way to add a semi-automatic cleaning process to any small or large shop. This small tumble blasting machine offers a large parts basket. We built the basket with welded ribs to properly mix and tumble parts.This means that while the parts are rotating they are also tumbling. This allows the abrasive blast gun to reach all parts while tumbling. Many competitive units overlook this.During the tumble blast process, the powerful 14 CFM tungsten carbide sandblast gun directs the blast stream into the parts basket. Additionally, the sandblast gun swings in/out of the basket to allow amazingly easy access.Tumble Blast Cabinet SystemAn important feature of this small tumble blast cabinet is the automatic timer. Set a time for tumbling and the unit will stop blasting when the timer stops. This means your parts are turned for you while you perform other activities. A convenient lid flips up and down as needed. This means easy access to parts. A safety valve on the lid comes installed. Therefore, when you open the lid, the safety valve cuts the air supply protecting users from the blast stream. Additionally, we include a protective shield on the window glass to prevent frosting.Parts BasketThis unit’s parts basket is no ordinary “bucket”. It has special ridges that ensure the parts properly tumble. This means the parts are all blasted as they pass and tumble around the blast stream. Finally, the basket easily lifts in and out of the cabinet. As a result, you can pull the parts out with the basket after blasting.Because the parts basket is easy to remove, you can utilize several baskets in your process. Load one up, start blasting, and reload it with another while you move the parts to their next place in the production line. Sandblast Tumbler UsesCommon uses for the T-14 small tumble blaster include plating preparation, blasting repetitive small parts, removing debris from parts. The T-14 saves labor costs too. By introducing a tumble blast cabinet into your process, you can reallocate labor elsewhere while the system does the blasting.Call, email or click the “Get Quote” button today to get a shipping quote on your very own T-14 tumble abrasive sandblasting cabinet.Blaster in ActionWARNING: This tumble blast cabinet cabinet is constructed from steel. In accordance with proposition 65 we are complying by indicating that steel has been known to contain Nickel. Nickel is a chemical known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.govAdditional informationAccessories IncludedTimerConstruction16 Gauge Welded SteelElectrical Requirements110 US VoltsItem Weight175 US PoundsLid AssistNo LiftsLid Safety ValveLid Valve InstalledLid StyleFlip Top OpeningOverall Dimensions50" (h) x 30" (w) x 20" (d)Parts BasketIncludedSandblast Dust CollectorNot IncludedSandblast System Air Requirements14 CFM @ 70-100 PSISandblast System QuantitySingle Blast SystemSandblaster OperationAutomated Timer ActivatedView Window25" x 10" AcrylicView Window ProtectionMylar Protection Installed
Part No.: 7001tc
Categories:
Parts and Accessories
Sandblaster Guns
DescriptionOur Tungsten Sandblast Gun 14 CFM Complete is a direct replacement for many sandblasting cabinets. The part is used on the model list is given below. This unit includes a tungsten carbide blast nozzle. Tungsten carbide lasts significantly longer than hardened steel or ceramic with the same use, media, and other environmental variables.This 14 CFM sandblast gun is a complete unit. Complete indicates the trigger gun housing, tungsten carbide nozzle, and orifice. This unit can produce 14 CFM with 70-90 PSI.Additional informationNozzle CFM14Nozzle Diameter1/4"Nozzle TypeTungsten CarbideFound on Model3624, 4224, FT 3522, FT 3624, FT 4826
Part No.: 2032
Categories:
Air Accessories
Parts and Accessories
Sandblaster Guns
DescriptionVALUVE ONLY replacement for part numbers: 2031 and 2031G
Part No.: 2031
DescriptionThis is a Cyclone Foot Pedal Assembly Complete replacement for pedal operated sandblast systems. Over time, valves, hoses, and barbs may wear out with even proper use. This part includes a steel foot pedal structure, installed control valve, and 6′ of air hose to allow convenient placement of the pedal. Simply remove the old unit and put this in place. Replacement can be done with hand tools. Pedal and hose only – gun not included. Replacement can be done with hand tools.Additional informationFound on Model3824, 4040, 4826, A 4800, M 4848 T
Part No.: 6021
Categories:
Parts and Accessories
View Windows
DescriptionView Window 46.25″ x 13.25″
Part No.: 2023
DescriptionCyclone manufacturing 24 inch sandblast cabinet gloves. Unlined and direct replacement for our abrasive sandblasting cabinets. These are natural rubber and unlined. They replace the gloves of many of our cabinets. Please let us know your model and we can help make sure these will properly fit.
Part No.: 5002
Categories:
Abrasive Blast Media
Glass Bead Media
DescriptionGlass bead media is one of the most popular bead blasting abrasives for sale today. This all-purpose abrasive media is ideal for honing and polishing parts. You can also peen, blend, finish, and remove light burrs. 60-100 Grit size - ideal for general purpose bead blasting.
Additional information
Weight: 50 lbs
Grit Size: 60-100
Part No.: 5009
Categories:
Abrasive Blast Media
Glass Bead Media
DescriptionGlass bead media is one of the most popular bead blasting abrasives for sale today. This all-purpose abrasive media is ideal for honing and polishing parts. 40-60 Grit size - coarser for heavier cleaning.
Additional information
Weight: 50 lbs
Grit Size: 40-60
Part No.: 5010
Categories:
Abrasive Blast Media
Glass Bead Media
DescriptionGlass bead media is one of the most popular bead blasting abrasives for sale today. This all-purpose abrasive media is ideal for honing and polishing parts. 100-170 Grit size - finer for precision finishing.
Additional information
Weight: 50 lbs
Grit Size: 100-170
Part No.: 5011
Categories:
Abrasive Blast Media
Glass Bead Media
DescriptionGlass bead media is one of the most popular bead blasting abrasives for sale today. This all-purpose abrasive media is ideal for honing and polishing parts. 170-325 Grit size - very fine for delicate finishing work.
Additional information
Weight: 50 lbs
Grit Size: 170-325
Part No.: 5021
Categories:
Abrasive Blast Media
Aluminum Oxide Brown
DescriptionAluminum oxide brown is probably the most popular abrasive blast media. Used for etching, paint removal, and preparing surfaces for re-coating. 60 Grit size - ideal for medium cleaning work.
Additional information
Weight: 50 lbs
Grit Size: 60 Grit
Abrasive Shape: Angular
Part No.: 5007
Categories:
Abrasive Blast Media
Aluminum Oxide Brown
DescriptionAluminum oxide brown is probably the most popular abrasive blast media. Used for etching, paint removal, and preparing surfaces for re-coating. 80 Grit size - versatile for general purpose blasting.
Additional information
Weight: 50 lbs
Grit Size: 80 Grit
Abrasive Shape: Angular
Part No.: 5022
Categories:
Abrasive Blast Media
Aluminum Oxide Brown
DescriptionAluminum oxide brown is probably the most popular abrasive blast media. Used for etching, paint removal, and preparing surfaces for re-coating. 120 Grit size - finer for precision work.
Additional information
Weight: 50 lbs
Grit Size: 120 Grit
Abrasive Shape: Angular
Part No.: 5039
Categories:
Abrasive Blast Media
Aluminum Oxide Brown
DescriptionAluminum oxide brown is probably the most popular abrasive blast media. Used for etching, paint removal, and preparing surfaces for re-coating. 150 Grit size - very fine for delicate finishing.
Additional information
Weight: 50 lbs
Grit Size: 150 Grit
Abrasive Shape: Angular